Home/Duma, 激光光斑分析仪, 激光测试仪器/BeamOn-激光光束分析仪




BeamOn提供了一个USB连接、软件驱动设备,可以通过高速USB 2.0端口连接到笔记本电脑(或台式机)上,并在Windows 7/8/10操作系统(32和64位)上运行。



Parameters Value
Camera type Monochrome interline transfer CCD,1/2″format
Sensor active area 6.47mm wide ×4.83mm high
Pixel size 8.6um(H)×8.3um(V)
Dimensions Ø64mm dia×48mm deep with 3 filters instanlled
CCD focal position Optical distance from camera front surface to sensor surface is 4.6±0.2mm
Spectral response BeemOn UV-NIR  190~1310nm
BeamOn Vis-NIR   350~1310nm
BeamOn-IR 1550: 1550±50nm
(*)Model BeamOn-IR 1550 is based on the standed CCD for VIS,which is coated with a conversion coating,enabling capture of singnals at the 1550±50nm.See response curve below.
Weight 295 gr.with cable
Power consumption 12V,2.6Watts
Accessories included 1×plastic cap
3×NG 1.6mm thick Schott colored filtter in houseing(NG4,NG9,NG10)-Included,stackable
One×8/32 threaded mouting hole
Dynamic range Up to 1011 using  software controlled gain control,electronic shutter and external filters
Shutter speed 1/50s to 1/100000 sec,9 steps
Software controlled gain 6dB to 60dB,16steps
Maximum frame rate 25Hz
Sensitivity 0.5 nW/cm2@633nm(VIS-NIR,UV-NIR)
5uW/mm2@1550nm(model IR 1550)
Saturation intensity 1mW/cm2,no filters(VIS-NIR,UV-NIR)
5mW/cm2 no filters(model IR 1550)
Damage threshold 50W/cm2 or 1J/cm2 with  filters
Null In CW mode,null function is avaliable to automatically substract backgroud
Operation with pulse lasers Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity
Triggering In pulsed mode,sliding bar control allows setting of threshold so as to display only frames with captured pulses.
Max frequency for single pulse display 10KHz



  • BeamOn-VIS-NIR: 350-1310nm
  • BeamOn-UV-NIR: 190-1310nm Windowless CCD
  • BeamOn-IR 1550: 1550nm+/-50nm


SAM1 Beam sampler (ratio 3X10^(-3))

SAM2 Beam sampler (ratio 1X10^(-6))

SAM3-A Beam sampler polarization preserving (ratio 0.0016 Avg)

RDC Beam reducer (ratio 2X1)

RDC-FILT: Filter mounted on RDC, 1/8 ND type, M37X0.75

MOUNTB: Mounting base

NG-Filters: 1.6mm thick Schott colored filter in housing with adaptor, types: NG4/NG9/NG10


There are no reviews yet.

Be the first to review “BeamOn-激光光束分析仪”

Your email address will not be published. Required fields are marked *

Go to Top