Laser Analyzing Autocollimator-激光光束定位仪

Home/Duma, 激光指向测试仪, 激光测试仪器/Laser Analyzing Autocollimator-激光光束定位仪

Laser Analyzing Autocollimator-激光光束定位仪




Laser Type CW & Pulsed
FoV Autocollimator ±40’ (H) x ±25’ (V)
FoV Telescope & Beam Profiler ±1°20’ (H) x ±50’ (V)
Clear Aperture 36 mm
Autocollimator’s Resolution 0.01 sec
Autocollimator’s Accuracy 1.0 sec
Light Source LED- 650, optional: 1060. Special order: 1310 nm
Retro-reflector for alignment ⌀64 mm, N.W 280 g Thread ⌀16 mm, <5”
Beam Divergence Measurements Down to 0.2 mRad or better
Line of Sight Retention as Function of Focusing +/- 2.5 seconds
Min. Focusing Distance Less than 17.5 cm
Built in coarse aiming Laser Pointer 638 nm power <1.0 mW Class 2 laser product, IEC60825-1
Beam width resolution Better than 2.5 μrad
Spectral Response 350 – 1310 nm (Telescope Mode) VIS 400-700 nm, NIR User specified
Resolution (H x V pixels) 1920 x 1200
Gain Control x24
Dynamic Range 60 dB , 12 bit
Exposure Speed 39 µsec to 20 sec
Frame Rate 40 fps (8 bit) 30 fps (12 bit)
Beam divergence accuracy ±2%
Position resolution of laser beam Better than 2.5 μrad
Pixel Size 5.86 µm x 5.86 µm
Background Subtraction User activated
Trigger • Internal Software

• Hardware Falling or Rising Edge

• Trigger Delay 0.015ms – 4.0 sec

Power Requirements ~2 Watt (Via USB 3.0 interface)
Dimensions (L x W x H) 240 x 154 x 190 mm
Weight (typical) 3 kg including cable
Interface USB 3.0, Windows 10 (32 & 64 bit)
Operating Temperature 0°– 35°C


EAC-1012-L19: Complete system including a collimator unit with USB3.0 CCD camera, built-in 5xND filters on a slider, software on CD, and a retro-reflector for infinity adjustment.


There are no reviews yet.

Be the first to review “Laser Analyzing Autocollimator-激光光束定位仪”

Your email address will not be published. Required fields are marked *

Go to Top